Brushless Servo Controllers
Trapezoidal

Model DC100A

The DC100A is ideal for controlling general purpose brushless motors or high performance servo motors in tight and responsive servo loops. This controller provides all the advantages of DC brush type motors without the maintenance associated with brushes. Hall effect sensors supply commutation information, while encoder feedback supplies velocity information. Set-up requirements are easy to understand potentiometer adjustments. Isolated control circuitry allows quick and easy interface to other equipment without the requirement of isolation transformers or other isolation circuitry. Indicators include power on, run, current limit, fault, and bus voltage. The DC100A is protected against undervoltage, overvoltage, and overcurrent.

Introl DC100A


                        Model DC100A-LC
This controller takes a basic Model DC100A and adds an internally mounted length control card. It incorporates all the functions of the DC100A and a length controller, converting it to a stand-alone single axis controller. The length control card utilizes differential encoder inputs with x4 logic, providing 4000 counts of position resolution per motor revolution.All parameters can be programmed on the fly, and are installed through a serial communication link with one of Introl's operator interfaces or a computer. As a stand-alone, this controller can be programmed with a single preset, executed each time the run input is initiated, or have one of four preset indexes selected externally.

                       DC100A-LCP  (pictured here)
This controller is a specially modified version of the basic DC100A-LC. It includes many features including the choice of either absolute or incremental motion control, as well as multi-line programming capability for  a specific control sequence.
The internally added  -LCP length controller card which is part of this controller, will soon be available as a compact and low cost stand-alone length controller.

Introl DC100A-LCP

If you would like more information about any of these products, please feel free to contact us by e-mail with any specific questions you have, or call us directly and speak with an application engineer personally about your inquiries. You may also request literature about our products on our Literature page.

Previous Page of Products

You are viewing
Trapezoidal Brushless Servo Controllers

Next Page of Products


Home  |  Products   |  Literature  |  Sales Info  |  Contact Us  |   Site Map  |

This page was last updated on Tuesday, November 18, 2003.

Introl Design, Inc. 48 North Street, Lockport, NY 14094
Phone (716) 434-6919    introl@introldesign.com      Fax (716) 434-1911

http://www.introldesign.com